DESCRIPTION
Was used the same platform in the big brother 33%. This airplane was developed for the 50-60 cc gas and the 4-5kW electric engines too. Model is for all diehards and sport pilots, flying either scale aerobatics or 3D.
These new parts developed for better flying and easy setup. Aeroplane flying now much more clear and easy. Rolls and snaps are exact and perfect. You don´t need any differential ailerons control.
The rudder has much better efficiency in slow flight and his shape use "airbrake system" too.
You can see some of the nice and practical points concerning build airplane:
-
Integrated composite formers and ribs with Secraft rudder arms installed
-
Canopy opening is large for easy access and installation
-
Integrated composite tray for receiver, batteries, servos, etc
-
All composite landing gear plate integrated into the fuselage
-
Carbon fibre firewall
-
Carbon fibre landing gear, wing and stab tubes
Recomendation Accessories:
ELECTRO power:
-
HACKER A80 / 10 + MasterSpin Opto 180A + prop 2bl. 24x10 + 10 cell 4500mA FuelPower.
GAS power:
-
DA60 , DLE55 + KS muffler set + 500ml fuel tank
Recomendation Accessories:
ELECTRO power :
HACKER A80 / 10+ MasterSpin Opto 180A+ prop 2bl. 24x10+ 10 cell 4500mA FuelPower.
GAS power: DA60 , DLE55 + KS muffler set + 500ml fuel tank
Servos :
2x JR DS8915(or DS8425) - stabilization
2x JR DS8915(or DS8425) - ailerons
1x JR DS8915 - rudder
And this is what has been done for you:
-
Wings, elevators and rudder are installed
-
Pre-drilled the rudder hinges
-
The clear canopy is glued into the frame.
-
Cowl installed, using 4 x M5 bolts.
-
Landing gear is pre-drilled
-
All control horns openings are pre-cut for our CNC
-
Sign points on the fuselage for rudder wires
Total weight the kit include hardware is 3,8 Kg.
There a line of accessories available for this airplane, such as spinner, wing covers, wheels, etc. All of them are listed on the order form.
